How to set up the Top2004 EPROM Programmer
1. For Exel 28C16 chip -
from the Option menu, select "Type"
On the far right of the dialog box, select the "FLASH/EE" radio button
in the manufacture list, select "EXEL"
in the Type list on the right, select 28C16
2. Burning - after placing the chip in the programmer:
select the Option menu, then "Run"
set the "Delay(mS/byte)" to 5ms, otherwise you will get "Error!" message
When BURNING chips, make sure the timing is set to 5ms or slower, anything faster (e.g. the default 2ms is too fast for this chip).
Click on the "Program" button
Then Verify
Monday, March 23, 2009
Sunday, March 22, 2009
EPROM Programmer
Subscribe to:
Posts (Atom)