Monday, March 23, 2009

EPROM Programmer settings for Excel 28c16 chip

How to set up the Top2004 EPROM Programmer

1. For Exel 28C16 chip -

from the Option menu, select "Type"
On the far right of the dialog box, select the "FLASH/EE" radio button
in the manufacture list, select "EXEL"
in the Type list on the right, select 28C16

2. Burning - after placing the chip in the programmer:
select the Option menu, then "Run"
set the "Delay(mS/byte)" to 5ms, otherwise you will get "Error!" message

When BURNING chips, make sure the timing is set to 5ms or slower, anything faster (e.g. the default 2ms is too fast for this chip).

Click on the "Program" button
Then Verify

2 comments:

  1. Top2004 is not a Xeltek programmer, right?

    ReplyDelete
  2. It doesn't look like it from what I can tell. I know Elnec programmers go by 3 or 4 different names depending on who's selling them.

    http://www.darkwire.com.au/html/device_programmers.html

    ReplyDelete